Speedgate - what is speed gate?

2019-07-19

Speedgate

Introduction
Speedgate is part of the access control system and is one of the important components of modern entrance and exit control.

speedgates


Speedgates Features:
1. Anti-tailing function: The infrared light band detection area in the channel can adjust the switch state according to the customer's precision requirements. The application of the light band to adapt to different requirements avoids the point where the infrared detector is easily contaminated and affects the reliability of judgment reliability. Can effectively judge the followers of unread cards. When the system determines that a trailing occurs, the system will react based on the position of the valid cardholder returned by the infrared detector. After the door open signal is issued, there are still some abnormal use that will cause an alarm.


2. Abnormal use conditions:

(1) When the door is closed, the pedestrian enters the entry body after the authorized door opening signal is issued. If the reverse detection belt detects that someone has entered before passing the first safety photoelectric detection belt, When the person does not leave, the buzzer will always give an alarm and the door will remain closed. The "aging" function does not calculate the time interval at this time.

(2) Reverse intrusion when the door is opened After the door wing is opened, if an unauthorized pedestrian enters the door detection area in the reverse direction, the door is immediately closed, as long as the first protection detection belt detects the presence of someone, "aging" The function does not calculate the time at this time, and the door returns to normal operation when the person leaves the second detection zone.

(3) When the pedestrian leaves the pedestrian, the pedestrian enters the second safety detection zone. Before the door returns to the basic state, the second safety detection zone detects that someone has entered without the legal door opening signal, and the alarm system issues an alarm. But as long as the protection detection area still detects someone, the door will not close.

(4) The trailing body detects the pedestrian from the first detector to the last detector that he left the first safety probe. The time gap is about 0.25 seconds. After the pedestrian leaves the first safety probe, the signal is in the reader. In the absence of an open door, the first detection zone detected a pedestrian (follower), the alarm sounded and the door remained open.

(5) After the normal trailing pedestrian leaves the protection detection zone, the first safety detection zone detects that an unauthorized person has broken in, the door is immediately closed, and the alarm sounds.


3. Drive: DC servo drive system


4, the reaction of the door in the emergency state: the door suddenly appears in the operation of the power failure, the door wing will stop in the original position can be freely pushed according to requirements each device can be installed an emergency button, press the button to activate the selected Emergency response mode. In general, open the channel in case of danger or panic. In the event of an emergency such as an alarm, the channel can be manually closed via the remote control button. After the power is turned on or after the emergency is removed, the door wing automatically resets after being self-checked.

#DC servo speedgate

DC servo speed gate

turnstile factory

Share this Post:

Get in Touch with us

Fill out more information, We will get back to you within 24 hours.

Factory Address

3, Block B 1-2 Floor, Heyuan Road, Dapin, Tangxia, Dongguan China

Brand

Jiaxuntong (JXT)

Contact Us

Business Phone : +86 18813385179

Work Time :8:00-8:00(Beijing time)

contact us